background image

Features of your vehicle

6

4

Using RADIO, SETUP, VOLUME
and AUDIO CONTROL

1.

Button 

The FM/AM button toggles between FM
and AM. Listed below are the paths as
the system switches from FM to AM and
back to FM.
• FM/AM : FM1

FM2

AM

FM1...

2.

Button

• When the 

is pressed, it will

automatically tune to the next lower
station.

• When the 

is pressed, it will

automatically tune to the next higher
station.

3. PRESET Buttons

• Press 

~

buttons less than

0.8 seconds to play the station saved
in each button.

• Press

~

buttons more than

0.8 seconds or longer to save the cur-
rent station to the respective button
with a beep.

4.

Button

Turn the LCD Display & Backlight
ON/OFF when 

button press.

5.

Button

• When the button is pressed, it auto-

matically scans the radio stations
upwards.

• The SCAN feature steps through each

station, starting from the initial station,
for 5 seconds.

• Press the 

button again to stop

the scan feature and to listen to the
currently selected channel.

6.

Button & 

Knob

• Turns the audio system on/off when

the ignition switch is on ACC or ON.

• If the knob is turned clockwise/counter-

clockwise, the volume will increase
/decrease.

7.

Button

Press this button to enter SETUP mode,
If no action is taken for 8 seconds, it will
return to previous mode.

In “SETUP” mode, rotate the VOLUME
knob to move the cursor between items,
and push the 

button to select.

ENTER

SETUP

VOL

SCAN

SCAN

DISP

DISP

6

1

6

1

SEEK

TRACK

SEEK

FM/AM

MD_USA_RADIO

MD_USA_RADIO

MD_USA_RADIO

Summary of Contents for PA710MDGLBT
































Reviews: