background image

4 25

Features of your vehicle

phone, please see your phone’s
User’s Guide for instructions.

NOTE:

Before  pairing a mobile phone, check
to see that the Bluetooth

®

function in

your mobile phone is set to “ON” state.

NOTE:

Once pairing with the phone is com-
pleted, there is no need to pair with
that phone again unless the phone is
deleted manually from the audio sys-
tem (refer “Deleting Phone” section) or
the vehicle’s information is removed
from the phone.

By Voice Recognition

Press button.

Say “Set Up”.

- The system replies with available

commands.

- To skip the information message, press

again and then a beep is heard.

Say “Pair Phone”

Proceed at next step.

Say the name of your phone when
prompted.

- Use any name to uniquely describe

your phone.

- Use Full name to voice tag.

- Not use to short name or similar to

voice command.

Bluetooth

®

system will repeat the

name you stated.

Say “Yes” to confirm.

The audio displays “searching ----

passkey: 0000” and asks you to initiate
pairing procedure from the phone.

➈ 

Search the Bluetooth

®

system on your

phone .Your phone should display your
[vehicle model name] on the
Bluetooth

®

device list. Then attempt

pairing on your phone.

➉ 

After Pairing is completed, your phone
will start to transfer phone/contact list
to the audio system.

- This process may take from a few min-

utes to over 10 minutes depending on
the phone model and number of
entries in the phone/contact list.

Tip

Press

button.

Pair the device after searching for
Bluetooth

®

devices in your mobile phone. 

Once pairing is complete, you will hear
the following message.

Beep

~

“S

et

u

p

 

sa

P

a

ir phone

“S

elect phone

Delete 

phone

Ch

a

nge priority

 or 

Bl

u

etooth off

“S

et

u

p

P

a

ir Phone

Ple

as

sa

a

 n

a

me for the phone

My Phone

 

sa

Ye

s”

 to proceed, otherwi

s

sa

B

a

ck

 or 

C

a

ncel

Re

a

dy for p

a

iring...ple

as

us

e yo

u

phone to connect to the 

s

y

s

tem the 

p

a

iring p

ass

 key i

s

 0000

Ye

s”

Ex: 

My phone

 or 

John

Summary of Contents for PA710MDGLBT
































Reviews: