Do not Run/Stop operation by switching on/off electromagnetic
contactors (Mc0, Mc1) on the primary or secondary sides of the
inverter.
Operate the inverter by Run/Stop commanding [FW/RV].
Inverter
Motor Terminal Surge Voltage Suppression Filter (for the
400V class)
In a system using an inverter with the voltage control PWM system, a
voltage surge caused by the cable constants such as the cable length
(especially when the distance between the motor and inverter is 10m or
more) and cabling method may occur at the motor terminals. A
dedicated filter of the 400V class for suppressing this voltage surge is
available. Be sure to install a filter in this situation.
Input power disconnection
This inverter is not able to protect input power disconnection.
Be careful to connect the wires.
plus