GB
9
The auxiliary input can be used to take advantage of the
sound quality of your Mini Component System when listening
to other sources.
Examples: A
television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
Set the system to standby mode and disconnect it and the external
source from the main.
Connect the audio cable to the rear of the Mini Component System.
Connect the...
To the connector marked...
Red jack
R (right)
White jack
L (left)
For optimum sound quality, do not invert the right and left
channels.
Plug the system back into the main socket and press Standby/On to
switch it on.
Select the AUX source by pressing AUX.
Result:
AUX
is displayed.
Switch the external source on.
Connecting to an External Source
1
2
3
4
5
This unit can output digital sound signals through this jack.
Use an optical cable to connect digital audio equipment.
(DAT deck, MD recorder, etc.).
Remove the dust cap (1) from the DIGITAL OUT jack. Then,
connect an optical cable plug to the DIGITAL OUT jack.
When the DIGITAL OUT jack is not being used
Attach the supplied dust cap.
CD Digital Out Jack
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation
of the speaker.
Do not install on the wall or on a high place of pole or other
unstable place to prevent any safety accident caused by falling
of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the
quality of the screen display.
The loudspeaker connector terminals are located on the rear
of the system.
Press and hold the clamp of the speaker terminal on the rear of the
unit.
Insert the end of the speaker cord into the terminal.
Match the polarity(colors):Red(+) to red(+) and black(-) to
black(-)
Release the finger from the clamp.
Use only speakers with the same speaker impedance as indicated
by the speaker terminals on the rear of the unit.
Connecting the Loudspeakers
1
2
3
MX-KDZ120 only
Match the polarity(colors):Blue(+) to blue(+) and black(-) to black(-);
Red(+) to red(+) and black(-) to black(-)
Summary of Contents for MX-KDZ100
Page 36: ...MEMO...
Page 37: ...MEMO...
Page 38: ...THIS APPLIANCE IS MANUFACTURED BY AH68 01288C...