The DVD/CD function is automatically selected when Disc
Skip button is pushed.
To select a specific disc, press the corresponding
Disc (1, 2, 3)
button
on the front panel or
Disc Skip
button on the remote control, until the
required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
If you wish to play the current disc only, press the
Repeat
button
on the remote control one or more times, until
1 CD
is displayed.
If you use the
Disc (1, 2, 3)
function when listening to the
radio or to a tape, the system switches automatically to the
DVD/CD mode.
If the disc selected is not loaded, the next disc is played
automatically.
.
GB
14
When playing a CD-R or CD-RW
User-edited CD-Rs (Recordable) and CD-RWs (Rewritable)
can be played back only if they are already “finalized”.
• You can play back your original CD-Rs or CD-RWs recorded in
music CD format. (However, they may not be played back
depending on their characteristics or recording conditions.)
• Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them,
or if the player’s lens is dirty.
• CD-RWs may require a longer readout time. (This is caused by
the fact that the reflectance of CD-RWs is lower than for
regular CDs.)
This unit has been designed to playback the CDs: Audio CD,
CD Text, DVD-OK, CD-R and CD-RW.
When you have loaded at least one disc into the player, you
can start listening to it.
Continued use of irregular shape discs (heart-shape, octagonal,
etc.) can damage the unit.
Switch the system on by pressing Standby/On button.
Select the DVD/CD function by pressing DVD/DVD-OK (
) button
on the front panel.
Load one or more discs.
Press the DVD/DVD-OK (
) button on the front panel or
Play/Pause(
) button on the remote control.
If you have loaded more than one disc, they will be played in turn.
Adjust the volume as required by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or - buttons on the remote control
To pause temporarily during playback, press the DVD/DVD-OK (
)
button.
Press the DVD/DVD-OK (
) button again to continue disc
playback.
Press the Stop(
) button when you have finished.
When playing a disc, you can load new discs without
stopping the current one. To do so, open the compartment by
pressing
Disc Change
button and load new discs in the other two
vacant slots (not the one containing the disc that you are playing).
You cannot rotate the carrousel during playback.
When no discs are loaded, the
“NO DISC”
indication is displayed.
The DVD player stops automatically after playing the three discs, if
the DVD REPEAT function has not been selected.
1
2
3
4
5
6
7
Listening to a Disc
Selecting a Disc in the Disc changer
Summary of Contents for MX-KDZ100
Page 36: ...MEMO...
Page 37: ...MEMO...
Page 38: ...THIS APPLIANCE IS MANUFACTURED BY AH68 01288C...
