background image

ENG - 26

Dear customer, thank you for purchasing our product. Please read the operating instructions 

carefully before putting the appliance into operation and keep these instructions including 

the warranty, the receipt and, if possible, the box with the internal packing.

GENERAL SAfETy INSTRUCTIONS

The appliance is designed exclusively for private use and for the envisaged purpose. 

 

This appliance is not fit for commercial use.

Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) 

 

and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, 

unplug it immediately. Do not put it in water.

When cleaning or putting it away, switch off the appliance and always pull out the plug 

 

from the socket (pull on the plug, not the cable) if the appliance is not being used and remove 

the attached accessories.

Do not operate the machine without supervision. If you should leave the workplace, always 

switch the machine off or remove the plug from the socket (pull the plug itself, not the lead).

To protect children from the dangers posed by electrical appliances, make sure that the cable 

is hanging low and that children do not have access to the appliance.

Check the appliance and the cable for damage on a regular basis. 

 

Do not use the appliance if it is damaged.

Do not try to repair the appliance on your own. Always contact an authorized technician. 

 

To avoid the exposure to danger, always have a faulty cable be replaced only by 

 

the manufacturer, by our customer service or by a qualified person and with a cable 

 

of the same type.

Pay careful attention to the following “Special Safety Instructions for this unit“.

SPECIAL SAfETy INSTRUCTIONS fOR ThIS UNIT

Check if the voltage indicated on the appliance corresponds to the local mains voltage before 

you connect the appliance.

Never use any accessories of parts from other manufactures. 

 

Your guarantee will become invalid if such accessories or parts have been used.

Do not use the appliance if the mains cord, the plug or other parts are damaged. 

Thoroughly clean the parts that will come into contact with food before you use the appliance 

for the first time.

Unplug the appliance immediately after use.

Never use you finger or an object to push ingredients down the feed tube while the appliance 

is running. Only the pusher is to be used for this purpose.

Keep the appliance out of the reach of children.

Never let the appliance run unattended.

Switch the appliance off before detaching and install any accessory.

Wait until moving parts have stopped running before you remove the parts of the appliance.

Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. 

 

Use only a moist cloth to clean the motor unit.

Do not attempt to grind bones, nuts or other hard items.

Never reach into the cutter housing. Always use the pusher.

Do not operate the appliance for more than 15 minutes at one time. 

 

After 15 minutes continuous use, allow a few minutes rest before next use.

Never operation the appliance continuously for more than 3 minutes at maximum power.

Never press Reversal button (REV) when the applince does not absolutely stop.

To avoid jamming, do not force to operate the unit with excessive pressure.

CAUTION:

 In order to avoid a hazardous situation, this appliance must never be connected 

 

to a timer switch.

Summary of Contents for MG 620









































Reviews: