Hyundai HYU HC666, Instruction Manual

Page: 12 / 28

- If the hair straightener is stored at lower temperatures, first of all let its temperature adapt
to the environment and thus you will maintain firmness of the plastic parts.
- The hair straightener must not be used for styling wigs, hairpieces or artificial hair.
- Hair straightener can be used for styling natural, coloured or bleached hair. But do not
use it for styling hair that is treated with chemical substances (e.g. hairspray, styling
agent, etc. ), the temperature effect could be reduced due to sticking of chemical
substances on the plates.
- Also, do not put the hair straightener on soft and easily flammable surfaces (e.g. bed,
towels, sheets, carpets ); they could be damaged by hot parts of the appliance.
- When handling the hair straightener, protect the power cord from contact with the hot
surface of the plates or other sources of heat.
- Switch off the hair straighteners right after its use, unplug it from power supply and let it
cool down. Then put it on a safe dry place, out of reach of children.
- Check the condition of the power cord of the appliance regularly.
- Do not wind the power cord around the appliance; this will extend life of the power cord.
- The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
- If you need to use an extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
- Never use the appliance for any other purpose than for that described in these
instructions for use!
- The manufacturer is not responsible for damage caused by improper handling of the
appliance (e.g.
fire, burning, hair damage, etc.
) and its guarantee does not cover the
appliance in the case of failure to comply with the safety warnings above.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A1 - ON/OFF button A6 - Hair iron
A2 - ON/OFF LED indicator A7 - Shaping brushes
A3 - Arrest ring A8 - Spiral attachment
A4 - Supply cord A9 - Heated plates
A5 - Hot-comb pliers A10 - Crepe plates
A11 - Release button
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the hair straightener. Remove all possible
adhesion foils, stick-on labels or paper from the appliance. Put the hair straightener on
suitable even surface (see par. I. SAFETY WARNING ). After unpacking, select the desired
attachment and place it on the main body. Plug power cord connector A4 to an electric
socket. Press A1 button. Red light will light up which indicates that the appliance is heating
up and operating. Wait for a while until appliance is heated to the set temperature. Then
the temperature will be kept automatically. Switch off the appliance after use by pressing
button
A1
, then take power supply fork out of the electric socket and let the appliance cool
down before storing.
Hair straightening and shaping (A6,A7)
Use the hair straightener for washed and dried or slightly damp hair, never for wet hair.
Before using the hair straightener, comb the hair so that it is not disheveled. Start with
styling the lower hair first. When styling hair, do not put locks of hair that are too thick
between the plates. Divide a lock in about 5 cm of its width and put it into an open hair
12
GB