background image

1. SAFETY.

1.1.

 

The operator of the machine is responsible for and has a duty of care in making sure that

the machine is operated safely and in accordance with the instructions in this user manual.
Please note the following safety points

1.1.2.

 

The machine should never be left it in a condition which would allow 

an untrained or unauthorised person/s to operate this machine. 
1.1.3.

 

All due care and diligence should be taken by the operator for the safety of and 

with regard to those around whilst using the machine 

1.2.

 

Some or all of the following PPE, Warning Signs and symbols may appear throughout this 
manual and you must adhere to their warning/s. Failure to do so may result in personal 
injury. 

Warning Signs and Symbols – FOLLOW safety messages to avoid or reduce risk of injury or death.

 

DANGER - indicates a 

hazard which if not 

avoided could result in 

serious injury or death.

 

WARNING - indicates a 

hazard which if not 

avoided could result in 

serious injury or death.

 

CAUTION - indicates a 

hazard which if not 

avoided might result 

in minor or moderate 

injury.

 

NOTE - indicates a 

situation that could 

easily result in 

equipment 

damage.

 

READ MANUAL

 

KEEP BYSTANDERS AWAY

BE AWARE OF 

BL

OWN

OBJECTS

KEEP NAKED FLAMES AWAY 

FROM FUEL

VIBRATION - 

K

EEP FUEL CAP 

TIGHT

DO NOT DIRECT OUTLET 

TOWARD PEOPLE

Page 4

Rev 2

Summary of Contents for HYB60





















Reviews: