4.4. Fuel tank maintenance.
4.4.1. Empty fuel tank once every year by draining the fuel tank.
4.4.2. Remove fuel cap (1) then use a hook to pull the fuel filter body (2) out of the
tank and take it off the hose.
4.4.3. Push the new fuel filter body into the hose. Place the fuel filter body in the
tank.
5. STARTING AND STOPPING THE MACHINE
5.1. Before starting.
5.1.1. If the engine is cold, turn the choke knob to the closed position (1).
5.1.2. If the engine is warm, turn the choke lever to open position (2). Also use this
position is the engine has been running but is still cold.
5.1.3. Put the unit on the ground. Check that bystanders are well clear of the general
work area and the nozzle.
5.1.4. Make sure you have a firm footing:
5.1.4.1. Hold the unit (1) with your left hand on the housing and put one foot
against the base plate to prevent it slipping.
5.1.4.2. Pull the starter grip (2) slowly with your right hand until you feel it
engage and give it a brisk strong pull. DO NOT pull the starter rope out all the
way as it might otherwise break.
5.1.4.3. DO NOT let the starter grip snap back. Instead guide it slowly back
into the housing so that the starter rope can rewind properly.
Observe safety precautions - see chapter" Safety Precautions".
Slide the stop switch (1) to ON. Move the throttle lever (2) to the
centre position - this is the starting throttle position. The throttle lever
can be used to select any throttle opening between idle speed (lower
stop) and full throttle (upper stop). Set the lever (2) to idle position
before switching off the engine.
Page 11
Rev 2
Summary of Contents for HYB60
Page 1: ...LEAF BLOWER Model HYB60 User Manual...
Page 2: ...Page 2 Rev 2...
