3.4. Adjusting the harness straps.
3.4.1. Pull the ends of the straps (1) downward to tighten the harness.
3.5. Loosening the harness straps.
3.5.1. Lift the tabs (2) of the two sliding adjusters. Adjust the straps so that
the back
-
plate is held firmly and comfortably against your back.
4. FUELLING
4.1. Unsuitable fuels or lubricants or mix ratios other than those specified may result
in serious damage to the engine (piston seizure,
rapid rate of wear, etc.).
4.2. Unleaded Petrol.
4.2.1 Your engine requires a mixture of petrol and engine oil. The quality of these
constituents and the mix ratio have a decisive influence on the function and service
life of the engine.
4.2.2. Mix ratio - Pre-mix 2-stroke oil with fresh unleaded petrol as follows:
Mineral based 2-stroke oil : 25:1 (40ml of oil per 1 litre of petrol)
Synthetic 2-stroke oil: 40:1 (25ml of oil per 1 litre of petrol).
4.2.3. Avoid direct skin contact with petrol and avoid inhaling petrol vapour.
4.2.3.1. Using the supplied container. Pour oil (1) into the canister first, then
add petrol (2) and mix thoroughly.
4.2.3.2. Fuel storage of mix:
4.2.3.2.1. Only mix sufficient fuel for a few months
'
work.
4.2.3.2.1. Store in approved safety- type fuel canisters in a dry and
safe location.
4.3. Fuelling.
4.3.1. Before fuelling, clean the filler cap and the area around it to ensure that no
dirt falls into the tank.
4.3.2. Position the unit so that the filler cap is facing up. Take care not to spill fuel
while fuelling and do not overfill the tank. After fuelling, tighten down filler cap by
hand as securely as possible.
4.3.3. Thoroughly shake the mixture in the canister before fuel
l
ing your machine.
Pressure may build up in the canister - open it carefully. Clean the fuel tank and
canister from time to time. Dispose of cleaning fluid properly at authorised disposal
location.
Page 10
Rev 2
Summary of Contents for HYB60
Page 1: ...LEAF BLOWER Model HYB60 User Manual...
Page 2: ...Page 2 Rev 2...
