7.10. Tensioning rewind spring.
7.10.1. Make a loop in the unwound starter rope and use it to turn the rope rotor six
full revolutions in the direction of the arrow (see illustration).
7.10.2. Make a loop in the unwound starter rope and use it to turn the rope rotor six
full revolutions in the direction of the arrow (see illustration).
7.10.3. Hold the rotor steady, straighten the twisted rope.
7.10.4. Release the rotor and let go of rope slowly so that it winds onto the rotor.
7.10.5. The starter grip must sit firmly in the rope guide bush. lf the grip droops to
one side
, i
ncrease spring tension by one additional turn.
7.10.6. When the starter rope is fully extended it must be possible to rotate the rotor
at least another half turn. lf this is not possible, the spring is over
tensioned and
could break. Take one turn of the rope off the rotor.
Fit the starter cover on the engine.
Tighten down the screws firmly.
Move the stop switch to OFF
.
8. SPECIFICATIONS
Page 18
Rev 2
Summary of Contents for HYB60
Page 1: ...LEAF BLOWER Model HYB60 User Manual...
Page 2: ...Page 2 Rev 2...