![background image](http://html1.mh-extra.com/html/hyundai/hspa800-ac/hspa800-ac_original-instructions-manual_2197036009.webp)
9
5. Technical specifications
Voltage and frequency
230-240 V˜ 50 Hz
Power
800W (max.1010 W)
Flow rate
1.5 L/min
Maximum pressure
22.7MPa
Net Weight
7.2 kg
Temperature
Min.10°C/ Max 40°C
IP(Ingress Protection)
IPX0
Insulation class
II
Guaranteed sound power level
110dB(A)
6. Controls and Functions
ON/OFF Switch (10):
The ON/OFF Switch (10) turns the power to the sprayer ON (“I”) and OFF (0”)
Prime/Spray Switch (11):
The Prime/Spray Switch (11) directs fluid to the Spray Hose (1) when set to SPRAY or to the
Return Hose (13) when set to PRIME. The Prime/Spray Knob is also used to relieve pressure
built up in the Spray Hose (refer to Pressure Relief Procedure ).
Pressure Gauge (8):
Optional accessory that identifies the amount of force the pump uses to push the fluid through
the Spray Gun (6).
Suction Hose (16):
Fluid is drawn through the Suction Hose (16) into the pump.
Return Hose (13):
Fluid is sent back through the Return Hose (13) to the original container when Prime/Spray
Switch (10) is in PRIME position.
Suction Hose Filter (1 5):
Strains the spray material to prevent the system from being clogged.
Spray Gun (6):
Controls the delivery of the fluid being pumped.
Spray Hose (1):
Connects the Spray Gun (6) to the pump.
Lance (1 9):
Optional accessory that can be attached to the end of the Spray Gun (6) to spray hard to reach
areas.
7. Material / Paint Selection
Do not use textured wall paints or coatings as this will block the spray gun tip and
damage internal components of the Airless Spray Station.
Although a large number of paints and materials can be sprayed, some cannot. Please check the
manufacturers’ recommendations before purchasing paint.
MATERIALS WHICH CAN BE USED:
Summary of Contents for HSPA800-AC
Page 1: ...1 AIRLESS PAINT SPRAYER HSPA800 AC PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE...
Page 20: ...20...
Page 23: ...23...
Page 32: ...29...