![background image](http://html1.mh-extra.com/html/hyundai/hspa800-ac/hspa800-ac_original-instructions-manual_2197036004.webp)
4
9) This system is capable or producing 20.7Mpa. Only use replacement parts or accessories that
are specified by the manufacturer and that are rated a minimum of 22.8Mpa.
10)Always engage the trigger lock when not spraying. Verify the trigger lock is functioning properly.
11)Verify that all connections are secure before operating the unit.
12)Know how to stop the unit and bleed pressure quickly. Be thoroughly familiar with the controls.
d) WARNING-To reduce the risk of injury.
1) Always wear appropriate gloves, eye protection, and a respirator or mask when painting.
2) Do not operate or spray near children. Keep children away from equipment at all times.
3) Don not overreach or stand on an unstable support. Keep effective footing and balance at all
times.
4) Stay alert and watch what you are doing.
5) Do not operate the unit when fatigued or under the influence of drugs or alcohol.
6) Do not kink or over-bend the hose.
7) Do not expose the hose to temperatures or to pressures in excess of those specified by the
manufacturer.
8) Do not use the hose as a strength member to pull or lift the equipment.
9) The Max. pressure of the air hose is 22.8Mpa, the normal pressure is 20.7Mpa
10)The paint can be compatible: phenol aldehyde paint series, nitryl paint series, alkyd paint series,
epoxy resin paint series, oxidized rubber paint series, latex paint series, water soluble paint
series. The paint should be put in shade and dry place.
11)Be aware of any hazards presented by the material being sprayed and consult the markings on
the container or information supplied by the manufacturer of the material to be sprayed,
including requirements for the use of personal protective equipment.
12)Do not spray any material there the hazard is not know.
Warning
The following warnings are for the setup, use, grounding, maintenance and repair of this equipment.
The exclamation point symbol alerts you to a general warning and the hazard symbol refers to
procedure-specific risks. Refer back to these warnings. Additional, product-specific warnings may
be found throughout the body of this manual where applicable.
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help
prevent fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic
drop cloths (potential static arc).
• Sprayer generates sparks. When flammable liquid is used in or near the sprayer or for flushing or
cleaning, keep sprayer at least 20 feet (6 m) away from explosive vapors.
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.
• Ground equipment and conductive objects in work area.
• If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment
until you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
ELECTRIC SHOCK HAZARD
Improper grounding, setup, or usage of the system can cause electric shock.
• Turn off and disconnect power cord before servicing equipment.
Summary of Contents for HSPA800-AC
Page 1: ...1 AIRLESS PAINT SPRAYER HSPA800 AC PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE...
Page 20: ...20...
Page 23: ...23...
Page 32: ...29...