Hyundai HSPA800-AC, Original Instructions Manual

Page: 10 / 32

10
Recommended for spraying the following materials:
• Water-based paints
• Wood preservatives
• Oil-based paints
• Primers
• Enamel paint
• Wash primer
• Varnish
• Oil
• Stains
MATERIALS WHICH CANNOTBE USED:
The Airless Spray Station CANNOT be used for the following materials:
• Paints and lacquers containing heavily abrasive components such as:

Exterior textured wall
paints

Glazes,

Lyes

Acids

Dispersion paints

Caustic and Alkaline
substances

Textured coatings

Emulsion paints
• Silicate paints.
• Flammable materials.
• Asphalt sealer.
• Block filler.
• Pesticides
•
Flammable liquid fertilizers
The use of these materials will cause premature wear and block the spray tip and will void warranty.
To obtain the best results from your Airless Spray Station, PLEASE READ THE INSTRUCTION
MANUAL CAREFULLY BEFORE USE.
8. ASSEMBLY
WARNING! Ensure the machine is disconnected from the power supply before
performing any of the following operations.
Spray Hose & Spray Gun Connection
1. Thread the Spray Hose (1) and tighten with supplied wrench (Fig .2 a).Do not overtighten.
2. Thread the other end of the Spray Hose (1) to the Spray Gun (6) and tighten with the supplied
wrench (Fig.2b). Do not overtighten.
Connecting Lance to Spray Gun
The Lance (19) is an optional accessory. The Spray Gun (6) can be used with or without the Lance