Hyundai HDT-L23, User Manual

Page: 26 / 27

24
Appendix
DEFAULT (PRE-PROGRAMMED) SETTINGS
General Setting
Language English Handset Name Reset
Auto Answer On Dial Mode Tone
Recall Duration Recall 1 (600ms)
Backlight On
Sounds Setting
Handset Melody Melody 1 Handset Ringer Volume Level 3
Handset Key Tones On Receiver Volume Level 2
Handset Tones On
Call Log Setting
Incoming Call Log Unchanged Dialed Call Log Unchanged
Message Waiting Indicator Reset
System Setting
Base Selection Auto PIN Code 0000
TROUBLESHOOTING
Problem(s) Tip(s)
No dialing tone
•
Check your phone connections.
•
The handset may be out of range. Move closer.
•
The battery capacity may be low. Charge battery.
Signal icon flashing
•
The handset may be out of range. Move closer.
•
If the handset displays
UNREGISTERED
, register the handset. See page 9.
•
Turn off Low Radiation mode. See page 23.
Registration fails
continuously
•
Your base memory may be full. Delete an un-used handset and try again. See
page 22.
No parking tone
•
The handset may not be placed properly on the cradle. Try again.
•
Charging contacts may be dirty. Disconnect the power supply first and then
clean contacts with a damp cloth.
• Turn on the handset tone. See page 19.
Handset on the charger
does not charge
•
The batteries may be defective. Purchase new batteries from your dealer.
•
Check that the batteries are inserted correctly.
•
Make sure the handset is placed properly on the charger. The battery icon
animates while charging.
No display
•
Check that the batteries are charged.
•
Check the power and phone connections.
Bad audio (crackles,
echo, etc.)
• The handset may be nearly out of range. Move closer to the base unit.
•
The phone may be interfered by nearby electrical appliances. Move the base
unit.
•
The phone may be at a location with thick walls. Move the base unit.
•
Turn off Low Radiation mode. See page 23.
Handset does not ring
•
Check that the handset ringer is turned on. See page 19.
Caller ID does not
display
•
Caller ID service may not be activated. Check with your service provider.
•
The caller’s information may be withheld or is unavailable.
Cannot make/answer a
2nd call
•
2nd call service may not be activated. Check with your service provider.
•
Check that the recall selection is correct. See page 20.