![background image](http://html.mh-extra.com/html/hyundai/hdt-l23/hdt-l23_user-manual_2197414011.webp)
Getting Started
- 9 -
Your handset may power down shortly if it is not charged after the battery is empty. If you are on the
phone while the battery is nearly empty, you will hear warning tones. Your call may be cut off shortly
after the warning.
WHAT IS STANDBY MODE?
Your phone is in standby mode when it is idle. The standby screen displays the handset name, the
signal icon, and the battery icon.
REGISTERING YOUR HANDSET
Registration allows communication between your base unit and handset(s). If your handset is not
registered, you will not be able to make a call or use some of the functions and features on the
phone.
To register your handset to an additional base unit, see Registering your handset with additional
base on page 22. If your handset displays
UNREGISTERED
, follow the steps below to register your
handset.
1.
Press
on the base unit for 4 seconds.
2.
Press
on the handset.
3.
Select
SYSTEM
Æ
REGISTER
. Press
.
4.
Enter the system PIN (Pre-set: 0000).
5.
Press 1, 2, 3, or 4 to select the base number you want. Your handset starts searching
for the base.
Registration shall be completed within 30 seconds. If registration is successful, the
signal icon displays steadily. If registration failed, repeat the above procedure.
NOTE:
Your base can register up to 4 handsets. After registering 4 handsets,
your base unit registration memory is full. If you attempt to register an
additional handset, registration will not be successful.
NOTE:
Your handset shall be already registered in the box.
Summary of Contents for HDT-L23
Page 1: ...Innovation SLIM User Guide HDT L23 ...
Page 27: ...Appendix ...