![background image](http://html.mh-extra.com/html/hyundai/hdt-l23/hdt-l23_user-manual_2197414024.webp)
22
The System
REGISTERING YOUR HANDSET WITH ADDITIONAL BASE
This section shows you how to register your handset to additional base unit(s). If your handset
displays
UNREGISTERED
, refer to Registering your handset on page 9.
1.
Press
on the base unit for 4 seconds.
2.
Press
on the handset.
3.
Select
SYSTEM
Æ
REGISTER
Press
.
4.
Enter the system PIN (Pre-set: 0000). Use
to make correction.
5.
Press 1, 2, 3, or 4 to select the base number you want. This base number will be
assigned to the base unit you are about to register to. Your handset starts searching
for the base.
Registration shall be completed within 30 seconds.
SELECTING A BASE UNIT
You can switch your handset between different registered base units. You can program the
handset to automatically connect to the closest base unit or only connect to a fixed base unit you
have specified.
1.
Press
.
2.
Select
SYSTEM
Æ
SELECT BASE
. Press
.
3.
Select the base unit you want or select
AUTO
if you want your handset to
automatically connect to the closest base unit.
4.
Press
. The new setting is saved.
DELETING A HANDSET
Use one handset to delete (de-register) another handset that shares the same base unit.
1.
Press
.
2.
Select
SYSTEM
Æ
DELETE HS
. Press
.
3.
Select the handset (number) you want to delete. Press
.
4.
Enter the system PIN. Use
to make correction.
5.
Press
. The handset is deleted.
TIP:
Handset Number. The handset number displays beside the handset name
during standby.
TIP:
Use
or
to navigate the menus.
NOTE:
Each handset can register up to 4 base units. After registering to 4 base
units, your handset registration memory is full. If you attempt to register to
additional base units, registration will not be successful.
Summary of Contents for HDT-L23
Page 1: ...Innovation SLIM User Guide HDT L23 ...
Page 27: ...Appendix ...