![background image](http://html.mh-extra.com/html/hyundai/h-hu8e-4-0-ui184/h-hu8e-4-0-ui184_instruction-manual_2196531016.webp)
IM2021
16
H-HU8E-4.0-UI184
1. On/off button of the sleep mode.
2. Steam speed adjustment 1/2/3.
3.Timer.
4. Humidity level (hygrostat).
Operation of the device H-HU8M-4.0-UI184
Switching on
Install the appliance vertically on a flat and dry surface, fill the tank with water then connect the device to the
power line. Turn on/off and steam outlet intensity knob all the way to the right. The device will turn on, the
indicator light will light up and steam will come out of the sprayer.At the very beginning of operation, the
atomizing level may appear unstable, which is caused by the temperature difference and water quality. It will
take a short period time for this process to stabilize.
Automatic switching off when there is no water
When water level in the tank drops below minimal level, the ultrasonic membrane will automatically switch off
and the red indicator will light up on the control panel. To continue operation of the appliance it is necessary
to fill the tank with water according to «Filling the water tank» paragraph, and then connect the appliance to
the electric mains.
Switching off
To switch the appliance off, turn on/off and steam outlet intensity knob all the way to the left positions and
disconnect the appliance from the electric mains.
Operation of the device H-HU8E-4.0-UI184
Switching on and night mode
Install the appliance vertically on a flat and dry surface, fill the tank with water then connect the device to the
power line. Press the "POWER/SLEEP" button on the control panel, the device will automatically start
working and the display will show the device operating mode indicator, steam output indicators, and the
current temperature value. To turn on the night mode, hold the "POWER/SLEEP" button for 2-3 seconds,
while the steam output indicators, the current temperature value/timer value will go out on the display. To
turn off the device/mode, press the "POWER/SLEEP" button on the control panel again. At the very
beginning of operation, the atomizing level may appear unstable, which is caused by the temperature
difference and water quality. It will take a short period time for this process to stabilize. After 10-25 minutes of
operation, the spray level gradually stabilizes.
Adjusting the steam output intensity
To adjust the steam output speed after turning on the device, touch the "SPEED" button, which will set the
1/2/3 speed.
Aroma function/Essential oil:
Put no more than 2-3 drops of essential oil into the essential oil cup before placing water tank onto the
base and turning the unit on.
Turn on the unit as indicated above.
The scent will be come out with the wind after turn on the machine
Timer to turn off the device
To set the timer, press the "TIMER" button on the control panel several times to select the time of operation,
and the set time turning off the device will be displayed on the display (from 1 to 12 hours). If you do not do
any actions for 5 seconds, the device will set the selected time.