Hyundai H-DVD5027, Instruction Manual

Page: 11 / 33

11
Operation
Video setup
General
Video setup page
Output mode
TV Mode
Sharpness
Brightness
Contrast
Audio Dolby Video Preference
• Output mode
S-Video: set to this item when connecting to
S-Video terminals.
YUV: set video output in analog component
video format when connecting to YUV terminals.
•
TV MODE
You can choose between progressive
(P-Scan) and interlaced output when playing
with “YUV” mode.
• SHARPNESS, BRIGHTNESS,
CONTRAST
You can set sharpness, brightness and
contrast according to your preference.
Preference setup
General
Preference page
TV Type
Audio
Subtitle
Disc menu
Parental
Password
Default
Audio Dolby Video Preference
•
TV TYPE
This unit is suitable for all kinds of TV
systems. You can select one of the PAL, NTSC
or Multi.
Multi: the TV system is auto switched
according to the disc system.
• SPEAKER SETUP : Downmix
LT/RT: The audio out is Left and Right
channels format even if the original sound is
5.1CH format.
Stereo: The audio out format is stereo even
if the original sound is 5.1CH format.
•
SPDIF SETUP
: Spdif output
Spdif off: no digital signal out (optical or
coaxial output off), only analog audio output.
RAW: no decoding on the amplifier digital
signal input.
PCM: the amplifier must be supported by PCM
decoding or Dolby digital decoding function.
Dolby setup
General
Dolby Digital Setup
Dual mono
Dynamic
Audio Dolby Video Preference
•
DUAL MONO
Stereo: stereo output signal,
L-Mono: left output signal,
R-Mono: right output signal,
Mix-Mono: left and right output average
signal.
• DYNAMIC
If watching large dynamic scope movie
program at night, by selecting this mode you
can reduce the volume to a very low level and
at the same time keep the fine details sounds.
In this case, this doesn’t disturb the family and
keep the quality sound.