19
Operation
When you enter color setting menu,
following interface will be displayed:
1
2
3
4
1. Parameter list. Touch a parameter to
select it. Saturation, brightness, contrast,
sharpness and hue are available for
adjustment.
2. Increase/decrease buttons. Touch to
increase or decrease the value.
3. Touch to reset your adjustment to default
values.
4. Touch to quit color setting.
You can also press cursor buttons on the RC
to select and adjust parameters.
DVD setup
Press SETUP button on the RC to go to
DVD setup menu. Press cursor buttons on
the RC to select parameters and options for
adjustment, press ENTER button to confirm
your selection. You can also touch needed
items on the screen as follows:
1
2 3
1. Parameter list. Touch a parameter to
select it.
2. Touch to select 1 or 2 menu page.
3. Option list button. Touch to open option
list for corresponding parameter.
Following parameters are available for
adjustment:
• OSD lang: Select on-screen display
language.
• Subtitle lang: Select a DVD subtitle
language.
• Audio lang: select a language of the DVD
audio.
• DVD menu lang: Select a language of the
DVD menu.
• Password: In order to make the Rating
feature work, the password mode must be
turned on. If you want to set the ratings limit,
you will need to enter the default password,
which is 0000, then press ENTER to confirm.
To change the password, enter the Password
change submenu. If you change the password,
the default password 0000 will be void.
• Rating: The Rating control level is for
parents to control playing content and protect
your children from violence and erotic. The
disc, the level of which is higher than the
setting level can not be played.
• TV shape: Select 4:3/PS (the wide-screen
image shows on the full screen, but some
part is cut off), 4:3/LB (the wide-screen image
shows and black bars appear on the top and
bottom of screen), Wide (wide-screen image is
shown).
• NTSC/PAL: Select color system NTSC or
PAL.
• Default: Reset to the initial factory settings.
Play/pause
The unit will automatically play from the first
sound track recorded on a disc/SD/MMC/USB
device. To ensure good system performance,
wait until the unit finishes reading the disc/
device information before proceeding. Press
button on the RC or 3/
button on the
panel to pause playback, press it again to
resume playback.
