11
Operation
- - -
In the menu, touch the item of the mode you
need to select the corresponding mode. Touch
the arrow icon in the right part of the screen to
switch between the 2 menu pages.
The DVD, USB and SD modes are only
available when a disc, USB or SD/MMC card is
inserted into the unit.
Navigation (option)
• To enable navigation mode, touch NAVI
button in the main menu. To enable or disable
NAVI mode you can also press MAP button on
the panel.
• Insert Navigation memory card into the
Memory card slot of the unit before enabling
navigation mode. The device will warn you if
the memory card is not properly inserted into
the card slot.
• For more details about operations with
navigation program, please read the instruction
manual to the navigation software. You can
download the quickstart guidance and full
instruction manual for the navigation program
from the web site of the navigation software
manufacturer.
On-screen display (OSD)
Press OSD button to show the current mode
General operations
Touch screen
Due to the touch screen, you can fulfill most
functions not only by pressing buttons but also
by touching the options you need.
Reset the unit
Operating the unit for the first time or after
replacing the car battery, you must reset the
unit. Press EJECT button and then press
RESET button (hole) under the panel to restore
the unit to the original factory settings.
Power button
Press any button (except OPEN button on
the panel) to turn on the unit. Press POWER
button on the RC or press and hold POWER/
MUTE button on the panel to turn off the unit.
Monitor tilt angle
Press TILT button to adjust monitor title
angle as follows: TILT1 => TILT2 => TILT3
=> TILT4 => TILT5 => TILT6 => TILT7. The
monitor will flip down accordingly.
Volume control
Press VOL+ button to increase the volume
level. Press VOL- button to decrease the
volume level.
Turning the sound off
When the power is on, press POWER/MUTE
button on the panel or MUTE button on the RC
to turn the sound off. Press it again or adjust
volume to turn the sound on.
Mode selection
• Repeatedly press MODE button on the RC
or on the panel to select an operation mode.
• In any mode press MENU button to display
the Main menu consisting of two pages:
