Quick Reference Guide I
48
47
I
Quick Reference Guide
ELANTRA HYBRID
HYUNDAI
DRIVING
MODE
MODE
MODE
MODE
OK
OK
TIRE PRESSURE MONITORING SYSTEM (TPMS)
Low Tire Pressure Indicator /
TPMS Malfunction Indicator
LOW TIRE PRESSURE INDICATOR
Illuminates if one or more of your tires are significantly under-inflated.
TPMS MALFUNCTION INDICATOR
Blinks for approximately one minute, then remains illuminated when there is
a malfunction with the TPMS. Inspect all tires and adjust the tire pressure to
specification. If the lamp remains illuminated, it is recommended that the
vehicle be checked by an authorized HYUNDAI dealer.
LOW TIRE PRESSURE / TIRE PRESSURE MONITOR /
TPMS MALFUNCTION DISPLAY(LCD DISPLAY)
Low Tire Pressure /
Tire Pressure Monitor /
TPMS Malfunction
Display
(shown on the cluster
LCD display)
Select the Driving Assist mode by
pressing the VIEW MODE
1
button
on the steering wheel to display tire
pressure.
Tire pressures will display after
driving a short distance. If a tire
pressure drops lower than
predetermined specification, the
Low Tire Pressure Indicator will
illuminate and the cluster
display
will indicate which tire requires air.
NOTE:
Environmental factors can affect the tire pressure. The two
main environmental factors are ambient air temperature and
elevation. Colder ambient air will reduce tire pressure, while hotter
ambient air will increase tire pressure. High elevation may also
increase tire pressure.
MODE
MODE
MODE
MODE
OK
OK
1
Please refer to your Owner's Manual for more information.
MODE
MODE
MODE
MODE
MODE
MODE
RES
CNCL
SET
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
RES
CNCL
SET
MODE
MODE
Setting Vehicle Distance
(Smart Cruise Control only)
Cruise Control/Smart Cruise Control
allows you to program the vehicle to
maintain a constant speed without
holding the accelerator pedal.
SCC assist you in setting the distance
from the vehicle ahead and will
maintain the selected distance
without you depressing the
accelerator or the brake pedal.
1
To turn On/Off cruise control.
2
Toggle switch UP to Resume or
Increase the cruise control speed.
3
Toggle switch DOWN to Set or
Decrease the cruise control speed.
4
To Pause the Cruise Control
Press the Vehicle distance button to set and
maintain the vehicle distance without
pressing the accelerator or brake pedal.
The vehicle distance will automatically
activate previous setting value when you
activate SCC.
Each time the button is pressed, the vehicle
distance changes as follows:
Adjusting the vehicle speed
1. Push the + switch
2
UP to increase cruising speed.
2. Push the - switch
3
DOWN to decrease cruising speed.
NOTE:
Quick toggle up/down will change speed by 1 mph. Holding
switch up/down will change speed by 5 mph.
To Cancel Cruise Control/Smart Cruise Control
Press the Driving Assist button
1
or depress the brake pedal.
CRUISE CONTROL (CC) /SMART CRUISE CONTROL (SCC)
Distance 2
Distance 3
Distance 4
Distance 1
MODE
MODE
MODE
MODE
MODE
MODE
RES
CNCL
SET
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
RES
CNCL
SET
MODE
MODE
2
3
1
4
