Quick Reference Guide I
18
17
I
Quick Reference Guide
ELANTRA HYBRID
HYUNDAI
FEATURE AND CONTROLS
This vehicle does not have a
replaceable 12V flooded lead acid
battery. The 12V battery is
integrated into the lithium high
voltage battery assembly. Is it
automatically protected against
vehicle current draw when a
minimum level of 12.8V 10% SOC
level is reached. The 12V Battery
Reset Switch has to be activated in
order to start the vehicle. This
should negate the need to jump
start the car.
If the door is locked you will need to
use the manual key to enter the
vehicle after removing the lock
access cover.
1. Press the lever located under the
cover with mechanical key.
1
2. While pushing the lever so that
the mechanical key does not fall
out of the cover hole, slowly push
it towards the rear of the vehicle
and remove the cover.
2
3. After removing the cover, only
driver’s door can be locked or
unlocked by using mechanical
key.
4. Turn the key toward the rear of the
vehicle to lock and toward the
front of the vehicle to unlock.
3
12 VOLT BATTERY RESET SWITCH
1. Press the 12V Battery Reset switch to reconnect the 12V battery.
2. Start the vehicle within 15 seconds of pressing the 12V Battery
Reset switch.
3. After starting vehicle ( indicator on), operate the vehicle safely
outdoors stopped and/or drive it for 30 minutes total to charge
the 12V battery fully.
If the reset does not work due to over discharge of the 12V battery,
try to jump-start the vehicle. For more detailed information, please
refer to your Owner’s Manual.
If the vehicle Start/Stop button does not respond (it has no indicator
light) and the dash does not illuminate, the vehicle may be operated
after the 12V Battery Reset Switch is activated per the instructions
below.
1
2
3
