Hyundai AV240DPAN, User Manual

Page: 241 / 283

Starting Voice Recognition
Starting Voice Recognition
Shortly press the [
ȿ
VR] key on the steering
remote controller (under 0.8 seconds) ೛
Say a command
Once voice recognition starts, the voice
command entry window and the six
representative commands are displayed.
If voice recognition is in [Normal Mode],
then the system will say “Please say a
command. Beep~”
• If voice recognition is in [Expert Mode],
then the system will only say a “Beep~”
(e.g. :screen displayed when ‘Help’ is stated)
• For proper recognition, say the command
after the voice instruction and beep tone.
Notice
Information
• To change the Normal/Expert setting, press
the [SETUP] key and enter the Voice
Recognition settings screen.
Skipping Prompt Messages
While prompt message is being stated
೛
Shortly press the [
ȿ
VR] key on the steering
remote controller (under 0.8 seconds)
The prompt message is immediately ended
and the beep tone will sound. After the
“beep”, say the voice command.
Re-starting Voice Recognition
While system waits for a command
೛
Shortly press the [ ȿ VR] key on the steering
remote controller (under 0.8 seconds)
The command wait state is immediately
ended and the beep ton will sound. After the
“beep”, say the voice command.
Using Voice Recognition