Hyundai AV240DPAN, User Manual, Page: 120 / 283

Using Voice Recognition
Ending Voice Recognition
While Voice Recognition is operating ೛
Press and hold the [
ȿ
VR] key on the
steering remote controller (over 0.8 seconds)
While using voice command, pressing a
steering wheel remote control or a different
key will end voice command.
Information
̲ In a state where the system is waiting for a
voice command, say “cancel” or “end” to end
voice command.
̲ In a state where the system is waiting for a
voice command, press and hold the [ ȿ VR]
key on the steering remote controller to end
voice command.
Using Voice Recognition
Press the [ ȿ VR] key on the steering remote
controller. The voice command entry window
and the six representative commands are
displayed.
Information
• If voice recognition is set to ‘Expert’, then the
‘Please say a command’ prompt will not be
provided. Only the ‘beep-’ will sound.
• If voice recognition is set to ‘Expert’, then the
six representative commands are not shown
on the screen.
• After the ‘Beep-’, the |
ݛଔ৲ | icon will change
to the | ࡸ۽ࢉݥیԆ | icon to indicate that a
command can now be stated.
Adjusting Voice Recognition
Volume
While Voice Recognition is operating ೛
Turn the
ೣ
Volume knob left/right to adjust
the voice recognition prompt volume