manualshive.com logo in svg

Hyundai 2014 Accent, Owner'S Manual

The 2014 Hyundai Accent owner's manual is a comprehensive and essential guide for any Accent owner. This manual covers everything you need to know about your vehicle, from basic maintenance to advanced features. Easily download this manual for free from manualshive.com to ensure you have all the information you need at your fingertips.

Share
Download
background image

What to do in an emergency

26

6

It is possible that some tires, espe-
cially with larger punctures or dam-
age to the sidewall, cannot be sealed
completely.
Air pressure loss in the tire may
adversely affect tire performance.
For this reason, you should avoid
abrupt steering or other driving
maneuvers, especially if the vehicle
is heavily loaded or if a trailer is in
use.
The Tire Mobility Kit is not designed
or intended as a permanent tire
repair method and is to be used for
one tire only.
This instruction shows you step by
step how to temporarily seal the
puncture simply and reliably.
Read the section "Notes on the safe
use of the Tire Mobility Kit".

Notes on the safe use of the Tire
Mobility Kit

• Park your car at the side of the

road so that you can work with the
Tire Mobility Kit away from moving
traffic.

• To be sure your vehicle will not

move, even when you're on fairly
level ground, always set your park-
ing brake.

• Only use the Tire Mobility Kit for

sealing/inflation passenger car tires.
Only punctured areas located with-
in the tread region of the tire can be
sealed using the tire mobility kit.

• Do not use on motorcycles, bicy-

cles or any other type of tires.

• When the tire and wheel are dam-

aged, do not use Tire Mobility Kit
for your safety.

• Use of the Tire Mobility Kit may not

be effective for tire damage larger
than approximately 0.24 in (6 mm).
Please contact the nearest
HYUNDAI dealership if the tire
cannot be made roadworthy with
the Tire Mobility Kit.

• Do not use the Tire Mobility Kit if a

tire is severely damaged by driving
run flat or with insufficient air pres-
sure.

• Do not remove any foreign objects

such as nails or screws that have
penetrated the tire.

• Provided the car is outdoors, leave

the engine running. Otherwise
operating the compressor may
eventually drain the car battery.

• Never leave the Tire Mobility Kit

unattended while it is being used.

• Do not leave the compressor run-

ning for more than 10 min. at a time
or it may overheat.

• Do not use the Tire Mobility Kit if

the ambient temperature is below 
-22°F (-30°C).

Summary of Contents for 2014 Accent























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Accent

AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
Bestop 54822 Installation Instructions Manual preview
54822
Brand: Bestop Pages: 11
Whispbar K455W Fitting Instructions Manual preview
K455W
Brand: Whispbar Pages: 14
Vauxhall 2014 Insignia VXR SuperSport Specifications preview
2014 Insignia VXR SuperSport
Brand: Vauxhall Pages: 56
ECS Electronics CR-066-BHU Manual preview
CR-066-BHU
Brand: ECS Electronics Pages: 16
Axxess AXRC-CH1 Installation Instructions Manual preview
AXRC-CH1
Brand: Axxess Pages: 8
Dodge Charger 1973 Body Service Manual preview
Charger 1973
Brand: Dodge Pages: 276
iArmor EDGE IA-W208 Manual preview
EDGE IA-W208
Brand: iArmor Pages: 6
Honda 1991 Civic Online Reference Owner'S Manual preview
1991 Civic
Brand: Honda Pages: 124
Enduro EM203 User Manual preview
EM203
Brand: Enduro Pages: 52
Griffin Technology iTrip Bluetooth User Manual preview
iTrip Bluetooth
Brand: Griffin Technology Pages: 6
Mitsubishi Pajero Pinin 1999 Workshop Manual preview
Pajero Pinin 1999
Brand: Mitsubishi Pages: 919
Coolster CHALLENGER GK-6125A 2018 Manual preview
CHALLENGER GK-6125A 2018
Brand: Coolster Pages: 45
Menabo SHADOW CADDY Fitting Instructions Manual preview
SHADOW CADDY
Brand: Menabo Pages: 12
Blackhawk Automotive BH6010 Operating Instructions And Parts Manual preview
BH6010
Brand: Blackhawk Automotive Pages: 8
FEATHERLITE TRAILERS COACH TRAILERS Owner'S Manual preview
COACH TRAILERS
Brand: FEATHERLITE TRAILERS Pages: 60

Brands by name

Popular brands

Load more brands