Hyundai 2014 Accent Owner'S Manual Download Page 172

Page: 172 / 406

4 95

Features of your vehicle

Steering wheel audio control
(if equipped)

The steering wheel audio control button
is installed to promote safe driving.

VOLUME (VOL +/-) (1)

• Press the up button (+) to increase vol-

ume.

• Press the down button (-) to decrease

volume.

MUTE (2)

• Press the MUTE button to cancel the

sound.

• Press the MUTE button again to acti-

vate the sound.

MODE (3)

Press the MODE button to select Radio,
CD (Compact Disc).

SEEK/PRESET (

) (4)

If the SEEK/PRESET button is pressed
for 0.8 second or more, it will work as fol-
lows in each mode.

RADIO mode

It will function as the AUTO SEEK select
button. It will SEEK until you release the
button.

CDP mode

It will function as the FF/REW button.

If the SEEK/PRESET button is pressed
for less than 0.8 second, it will work as
follows in each mode.

RADIO mode

It will function as the PRESET STATION
select buttons.

CDP mode

It will function as the TRACK UP/DOWN
button.

Detailed information for audio control
buttons is included in the following pages
in this section.

CAUTION

Do not operate audio remote con-
trol buttons simultaneously.

ORB040089

PA710RBU SW

Type A

Type B

Summary of Contents for 2014 Accent























































































































































































































































































































































































































Search results

Summary of Contents for 2014 Accent

Reviews:

Related manuals for 2014 Accent

Brands by name

Popular brands

Hyundai 2014 Accent, Owner'S Manual

Search results

Summary of Contents for 2014 Accent

Reviews:

Related manuals for 2014 Accent

Brands by name

Popular brands