manualshive.com logo in svg

Hyundai 2014 Accent, Owner'S Manual

The 2014 Hyundai Accent owner's manual is a comprehensive and essential guide for any Accent owner. This manual covers everything you need to know about your vehicle, from basic maintenance to advanced features. Easily download this manual for free from manualshive.com to ensure you have all the information you need at your fingertips.

Share
Download
background image

3 17

Safety features of your vehicle

B200A02NF

WARNING

You should place the lap belt por-
tion as low as possible and snugly
across your hips, not on your waist.
If the lap belt is located too high on
your waist, it may increase the
chance of injury in the event of a
collision. Both arms should not be
under or over the belt. Rather, one
should be over and the other under,
as shown in the illustration.
Never wear the seat belt under the
arm nearest the door.

Seat belts - Front passenger and rear
seat 3-point system with combination
locking retractor

To fasten your seat belt: 

Combination retractor type seat belts are
installed in the rear seat positions to help
accommodate the installation of child
restraint systems. Although a combina-
tion retractor is also installed in the front
passenger seat position, it is strongly
recommended that children always be
seated in the rear seat. NEVER place
any infant restraint system in the front
seat of the vehicle.
This type of seat belt combines the fea-
tures of both an emergency locking
retractor seat belt and an automatic lock-
ing retractor seat belt. To fasten your seat
belt, pull it out of the retractor and insert
the metal tab into the buckle. There will
be an audible "click" when the tab locks
into the buckle. When not securing a
child restraint, the seat belt operates in
the same way as the driver's seat belt
(Emergency Locking Retractor Type). It
automatically adjusts to the proper length
only after the lap belt portion of the  seat
belt is adjusted manually so that it fits
snugly around your hips.

WARNING

• Verify the shoulder belt anchor is

locked into position at the appro-
priate height. Never position the
shoulder belt across your neck or
face. Improperly positioned seat
belts can cause serious injuries
in an accident.

• Failure to replace seat belts after

an accident could leave you with
damaged seat belts that will not
provide protection in the event of
another collision leading to per-
sonal injury or death. Replace
your seat belts after being in an
accident as soon as possible.

Summary of Contents for 2014 Accent























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Accent

Jeep 2011 grand cherokee Accessories Quick Reference Manual preview
2011 grand cherokee
Brand: Jeep Pages: 22
Jeep 2013 Grand Cherokee Owner'S Manual preview
2013 Grand Cherokee
Brand: Jeep Pages: 704
Jeep 2012 Liberty Owner'S Manual preview
2012 Liberty
Brand: Jeep Pages: 558
Subaru SPLASH GUARD Installation Manual preview
SPLASH GUARD
Brand: Subaru Pages: 3
Thule 1308 Instructions Manual preview
1308
Brand: Thule Pages: 8
Yakima StickUp Installation Instructions Manual preview
StickUp
Brand: Yakima Pages: 21
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
Ranger design 1525-NS Installation Manual preview
1525-NS
Brand: Ranger design Pages: 22
National Cycle Quantum hardcoated N30216 Assembly Instructions And Owner'S Manual preview
Quantum hardcoated N30216
Brand: National Cycle Pages: 3
Prorack K544 Fitting Instructions Manual preview
K544
Brand: Prorack Pages: 20
Toyota Sienna 2021 Manual preview
Sienna 2021
Brand: Toyota Pages: 600
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
Camoplast T4S Installation Manuallines preview
T4S
Brand: Camoplast Pages: 19
Subaru Legacy 2011 Quick Reference Manual preview
Legacy 2011
Brand: Subaru Pages: 19
WABCO TP19039 Manual preview
TP19039
Brand: WABCO Pages: 34
Enduro EM203 User Manual preview
EM203
Brand: Enduro Pages: 52
JAC HFC7151M1V-U221B Workshop Manual preview
HFC7151M1V-U221B
Brand: JAC Pages: 106

Brands by name

Popular brands

Load more brands