Hyundai 2012 Santa Fe Sport Owner'S Manual Download Page 104

Page: 104 / 419

4 25

Features of your vehicle

Resetting the sunroof

Whenever the vehicle battery is discon-
nected or discharged, or related fuse is
blown, you must reset your sunroof sys-
tem as follows:

1. Turn the ignition switch to the ON

position and close the sunroof com-
pletely.

2. Release the control switch.
3. Pull and hold the sunroof control

switch downward until the sunroof tilts
and slightly moves up and down.
Then, release the control switch.

4. Pull and hold the sunroof control

switch downward until the sunroof is
operated as follows;

TILT DOWN

→

SLIDE OPEN

→

SLIDE CLOSE

Then, release the control switch.

When this is complete, the sunroof sys-
tem is reset.

❈

For more detailed information, contact
an authorized HYUNDAI dealer.

CAUTION

If the sunroof is not reset when the
vehicle battery is disconnected or
discharged, or related fuse is
blown, the sunroof may operate
improperly.

Summary of Contents for 2012 Santa Fe Sport




































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Santa Fe Sport

Reviews:

Related manuals for 2012 Santa Fe Sport

Brands by name

Popular brands

Hyundai 2012 Santa Fe Sport, Owner'S Manual

Search results

Summary of Contents for 2012 Santa Fe Sport

Reviews:

Related manuals for 2012 Santa Fe Sport

Brands by name

Popular brands