Hyundai 2012 Santa Fe Sport Owner'S Manual Download Page 318

Page: 318 / 419

What to do in an emergency

F070300AFD

Changing tires

1. Park on a level surface and apply

the parking brake firmly.

2. Shift the shift lever into R

(Reverse) with manual transaxle
or P (Park) with automatic
transaxle.

3. Activate the hazard warning flash-

er.

4. Remove the wheel lug nut wrench,

jack, jack handle, and spare tire
from the vehicle.

5. Block both the front and rear of the

wheel that is diagonally opposite
the jack position.

WARNING

- Changing a tire

• To prevent vehicle movement

while changing a tire, always
set the parking brake fully,
and always block the wheel
diagonally opposite the wheel
being changed.

• We recommend that the

wheels of the vehicle be
chocked, and that no person
remain in a vehicle that is
being jacked.

1VQA4022

1VQA4023

Summary of Contents for 2012 Santa Fe Sport




































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Santa Fe Sport

Reviews:

Related manuals for 2012 Santa Fe Sport

Brands by name

Popular brands

Hyundai 2012 Santa Fe Sport, Owner'S Manual

Search results

Summary of Contents for 2012 Santa Fe Sport

Reviews:

Related manuals for 2012 Santa Fe Sport

Brands by name

Popular brands