Hyundai 2012 Santa Fe Sport Owner'S Manual Download

Page: 314 / 419

What to do in an emergency

This device complies with Part 15
of the FCC rules.

Operation is subject to the following
two conditions:
1.This device may not cause harmful

interference, and

2.This device must accept any inter-

ference received, including inter-
ference that may cause undesired
operation.

WARNING

Changes or modifications not
expressly approved by the party
responsible for compliance
could void the user’s authority
to operate the equipment.

Summary of Contents for 2012 Santa Fe Sport




































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Santa Fe Sport

Reviews:

Related manuals for 2012 Santa Fe Sport

Brands by name

Popular brands

Hyundai 2012 Santa Fe Sport, Owner'S Manual

Search results

Summary of Contents for 2012 Santa Fe Sport

Reviews:

Related manuals for 2012 Santa Fe Sport

Brands by name

Popular brands