Hyundai 2008 Azera, Owner'S Manual

Page: 190 / 345

1
FEATURES OF YOUR HYUNDAI
176
M455SB01TG-AAT
1. Power Button and Volume Control
o Used for turning on/off the audio sys-
tem.
o Press this button when using the audio
system to turn off the power.
o Turn the volume control clockwise to
increase volume and counterclockwise,
to decrease. (The volume level is dis-
played when adjusting the volume.)
2. Automatic Channel Seek Button
(SEEK)
Press this button to automatically find and
tune to next available channel.
(Press [
] to automatically seek next avail-
able channel in higher frequencies and
[
] in lower frequencies.)
NOTE:
If the channel is not received well, use
the manual control (4).
3. Preset Memory Button
Press this button and hold for less than 0.8
seconds to easily listen to the channel
memorized to the button. Also, when you
are listening to the channel other than the
channel memorized to the button using
TUNE or SEEK, press the button you wish
to memorize current channel to and hold
for more than 0.8 seconds until it beeps to
memorize the channel.
4. Manual Channel Select & Sound
Quality Control
o When listening to a radio channel, ro-
tate this control to manually adjust the
frequency. Turn this control to the right
to increase the frequency and left, to
decrease.
o This selects all functions related with
audio quality.
o When listening to the audio system,
press this button to select following
sound qualities in respective order.
BASS
→
MIDDLE
→
TREBLE
→
FADER
→
BALANCE
→
EQUALIZER
→
Current State
o Rotate the control to adjust the sound
mode when adjusting sound quality.
5. SCAN Button
Press this button to tune to all available
channels for 5 seconds each. (LCD will
display "SCAN") Press the button once
again to cancel scanning.
6. LCD (Liquid Crystal Display)
It displays the state of the system when
listening to the radio such as AM, FM1,
FM2, Stereo(ST), preset number, fre-
quency received, EQ mode (CLASSIC,
POP, ROCK, JAZZ) and SCAN status.
7. Radio Band (FM/AM) Selection
Button
o This selects FM/AM and the radio band
will change in the following order every
time you press the button.
FM1
→
FM2
→
AM