manualshive.com logo in svg

Hyundai 2008 Azera, Owner'S Manual, Page: 318 / 345

Share
Download
Hyundai 2008 Azera Owner'S Manual Download Page 318

8

CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS

2

ENGINE NUMBER

VEHICLE IDENTIFICATION
NUMBER (VIN)

I010B01A-AAT

I010A01O-AAT

The vehicle identification number (VIN) is
the number used in registering your car
and in all legal matters pertaining to its
ownership, etc. It can be found in three
different places on your car:

1. On the bulkhead between the engine

and passenger compartments.

2. On the left top side of the instrument

panel where it can be seen by looking
down through the windshield.

3. On the lower side of the center pillar

outer panel.

The engine number is stamped on the
engine block as shown in the drawing.

TIRES

I020A02A-AAT

TIRE INFORMATION

The tires supplied on your new Hyundai
are chosen to provide the best perfor-
mance for normal driving.
If you ever have questions about your
tire warranty and where to obtain ser-
vice, see the tire manufacturer's book-
let included with your vehicle's Owner's
Manual Literature Kit.

I010A01TG-A

HTG6003-1

Summary of Contents for 2008 Azera


























































































































































































































































































































































Reviews:

No comments