manualshive.com logo in svg

Hyundai 2008 Azera, Owner'S Manual, Page: 52 / 345

Share
Download
Hyundai 2008 Azera Owner'S Manual Download Page 52

1

FEATURES OF YOUR HYUNDAI

38

!

WARNING:

A child can be seriously injured or killed
in a collision if the child restraint is not
properly anchored to the car and the
child is not properly restrained in the
child restraint.  Always follow the child
seat manufacturer’s instructions for in-
stallation and use.

The ISOFIX anchors are located between
the seatback and the seat cushion of the
rear seat left and right outboard seating
positions.

B230D02TG

ISOFIX Anchor

ISOFIX Anchor
Position Indicator

B230D03TG

Follow the child seat manufacturer's in-
structions to properly install safety seats
with ISOFIX or ISOFIX-compatible attach-
ments.

Once you have installed the ISOFIX child
restraint seat, assure that the seat is prop-
erly attached to the ISOFIX and tether
anchors. Also, test the safety seat before
you place the child in it. Tilt the seat from
side to side. Also try to tug the seat forward.
Check to see if the anchors hold the seat
in place.

!

CAUTION:

Do not allow the rear seat belt webbing to
get scratched or pinched by the ISOFIX-
seat latch and ISOFIX anchor during the
installation.

Summary of Contents for 2008 Azera


























































































































































































































































































































































Reviews:

No comments