Hyundai 2008 Azera Owner'S Manual Download Page 301

Page: 301 / 345

DO-IT-YOURSELF MAINTENANCE

Replacement instructions:

1. Allow the bulb to cool. Wear eye protec-

tion.

2. Open the engine hood and disconnect

the negative (-) post of the battery.

3. Always grasp the bulb by its plastic

base, avoid touching the glass.

Headlight

Headlight
(High beam)

Headlight
(Low beam)

G270A01TG

Front Fog Light

G270A02TG

4. Using a socket wrench of the correct

size, remove the headlight assembly
mounting bolts and nut.

G270A03TG

5. Disconnect the power cord from the

back of the headlight.

HTG5024

6. Turn the plastic cover counterclock-

wise and remove it.

Summary of Contents for 2008 Azera


























































































































































































































































































































































Search results

Summary of Contents for 2008 Azera

Reviews:

Hyundai 2008 Azera, Owner'S Manual, Page: 301 / 345

Search results

Summary of Contents for 2008 Azera

Reviews: