FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 19
B180B04S-AAT
Pre-tensioner Seat Belt
Pre-tensioner Seat Belt
Pre-tensioner Seat Belt
Pre-tensioner Seat Belt
Pre-tensioner Seat Belt
Your Hyundai vehicle is equipped with driver's
and front passenger's pre-tensioner seat belts.
The purpose of the pre-tensioner is to make
sure that the seat belts fit tightly against the
occupant's body in certain frontal collisions.
The pre-tensioner seat belts can be activated
alone or, where the frontal collision is severe
enough, together with the airbags.
B180B01S
The pre-tensioner seat belt operates in the
same way as an Emergency Locking Retractor
(ELR) type of seat belt. When the vehicle stops
suddenly, or if the occupant tries to lean for-
ward too quickly, the seat belt retractor will lock
into position. However, in certain frontal colli-
sions, the pre-tensioner will activate and pull
the seat belt into tighter contact against the
occupant's body.
B180B02S
Driver's side airbag
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
Passenger's
side airbag
The seat belt pre-tensioner system consists
mainly of the following components. Their loca-
tions are shown in the illustration.
1. SRS airbag warning light
2. Seat belt pre-tensioner assembly
3. SRS control module
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
To obtain maximum benefit from a pre-
To obtain maximum benefit from a pre-
To obtain maximum benefit from a pre-
To obtain maximum benefit from a pre-
To obtain maximum benefit from a pre-
tensioner seat belt:
tensioner seat belt:
tensioner seat belt:
tensioner seat belt:
tensioner seat belt:
1.
1.
1.
1.
1. The seat belt must be worn correctly.
The seat belt must be worn correctly.
The seat belt must be worn correctly.
The seat belt must be worn correctly.
The seat belt must be worn correctly.
2.
2.
2.
2.
2. The seat belt must be adjusted to the
The seat belt must be adjusted to the
The seat belt must be adjusted to the
The seat belt must be adjusted to the
The seat belt must be adjusted to the
correct position.
correct position.
correct position.
correct position.
correct position.
The ISOFIX anchors are located between the
seatback and the seat cushion of the rear seat
left and right outboard seating positions.
Follow the child seat manufacturer's instruc-
tions to properly install safety seats with ISOFIX
or ISOFIX-compatible attachments.
Once you have installed the ISOFIX child re-
straint seat, assure that the seat is properly
attached to the ISOFIX and tether anchors.
Also, test the safety seat before you place the
child in it. Tilt the seat from side to side. Also try
to tug the seat forward. Check to see if the
anchors hold the seat in place.
WARNING:
If the child restraint seat is not anchored
properly, the risk of a child being seriously
injured or killed in a collision greatly in-
creases.
B230D02E
