Hyundai 2001 Elantra Owner'S Manual Download Page 21

Page: 21 / 168

FEATURES OF YOUR HYUNDAI

1- 12

B160D01A-AAT

When to Replace Seat Belts

Entire in-use seat belt assembly or assemblies
should be replaced if the vehicle has been
involved in an accident. This should be done
even if no damage is visible. Additional ques-
tions concerning seat belt operation should be
directed to your Hyundai Dealer.

B160B01A-AAT

Periodic Inspection

It is recommended that all seat belts be in-
spected periodically for wear or damage of any
kind. Parts of the system that are damaged
should be replaced as soon as possible.

B160C01A-AAT

Keep Belts Clean and Dry

Seat belts should be kept clean and dry. If belts
become dirty, they can be cleaned by using a
mild soap solution and warm water. Bleach,
dye, strong detergents or abrasives should not
be used because they may damage and weaken
the fabric.

B170A04A-AAT

HEIGHT ADJUSTABLE FRONT SEAT
SHOULDER BELT (If Installed)

You can adjust the height of the shoulder belt
anchor to one of the 4 positions.
If the height of the adjusting seat belt is too near
your neck, you will not be getting the most
effective protection. The shoulder portion should
be adjusted so that it lies across your chest and
midway over your shoulder nearest the door
and not your neck.
To adjust the height of the seat belt anchor,
lower or raise the height adjuster into an appro-
priate position. To raise the height adjuster, pull
it up. To lower it, push it down while pressing the
height adjuster button.
Release the button to lock the anchor into
position. Try sliding the release button to make
sure that it has locked into the position.

B170A01E

This could cause serious internal injuries.

This could cause serious internal injuries.
For proper protection when the vehicle is in

For proper protection when the vehicle is in

For proper protection when the vehicle is in
motion, have the seatback upright.

motion, have the seatback upright.

motion, have the seatback upright.
Then sit back in the seat and wear your

Then sit back in the seat and wear your

Then sit back in the seat and wear your
safety belt properly. See page 1-13.

safety belt properly. See page 1-13.

B160A01A-AAT

CARE OF SEAT BELTS

Seat belt systems should never be disassem-
bled or modified. In addition, care should be
taken to assure that seat belts and belt hard-
ware are not damaged by seat hinges, doors or
other abuse.

WARNING:

When you return the rear seatback to its

When you return the rear seatback to its
upright position after the rear seatback was

upright position after the rear seatback was

upright position after the rear seatback was
folded down, be careful not to damage the

folded down, be careful not to damage the

folded down, be careful not to damage the
seat belt webbing or buckle. Be sure that the

seat belt webbing or buckle. Be sure that the

seat belt webbing or buckle. Be sure that the
webbing or buckle does not get caught or

webbing or buckle does not get caught or

webbing or buckle does not get caught or
pinched in the rear seat.

pinched in the rear seat.