DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
6-17
5. Open the hood.
6. Draw the vertical line (through the center of
each headlight beam pattern) and the hori-
zontal line (through the center of each head-
light beam pattern) on the aiming screen.
And then, draw the horizontal parallel line at
0.8 in. (21 mm) under the horizontal line.
7. Adjust each cut-off line of the low beam to
the parallel line with a phillips screwdriver
- VERTICAL AIMING
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
Horizontal aiming should not be adjusted by
Horizontal aiming should not be adjusted by
Horizontal aiming should not be adjusted by
Horizontal aiming should not be adjusted by
Horizontal aiming should not be adjusted by
a driver.
a driver.
a driver.
a driver.
a driver.
If the vehicle has had front body repair and the
headlight assembly has been replaced, the
headlight aiming should be checked using the
aiming screen as shown in the illustration. Turn
on the headlight switch. (Low Beam Position)
1. Adjust headlights so that main axis of light is
parallel to center line of the body and is
aligned with point "P" shown in the illustra-
tion.
2. Dotted lines in the illustration show center of
headlights.
G290B02E-AAT
Adjustment After Headlight Assembly
Adjustment After Headlight Assembly
Adjustment After Headlight Assembly
Adjustment After Headlight Assembly
Adjustment After Headlight Assembly
Replacement
Replacement
Replacement
Replacement
Replacement
4. Clean the head lights lens and turn on the
headlight (Low beam).
G290A01E
G290B01S
Vertical
line
Cut-off line
Ground line
Horizontal line
L
W
H
H
"P"
0.8in.
Vertical aiming
G290A02E-AAT
HEADLI
HEADLI
HEADLI
HEADLI
HEADLIGHT AIMING ADJUSTMENT
GHT AIMING ADJUSTMENT
GHT AIMING ADJUSTMENT
GHT AIMING ADJUSTMENT
GHT AIMING ADJUSTMENT
Before performing aiming adjustment, make sure
of the following.
1. Keep all tires inflated to the correct pres-
sure.
2. Place the vehicle on level ground and press
the front bumper & rear bumper down sev-
eral times. Place the vehicle at a distance of
118.1 in. (3,000 mm) from the test wall.
3. See that the vehicle is unloaded (except for
full levels of coolant, engine oil and fuel, and
spare tire, jack, and tools). Have the driver
or equivalent weight placed in driver's seat.
matching the plastic base with the headlight
hole. Retighten the bulb spring and recon-
nect the power cord.
6. Use the protective cap and carton to dis-
pose of the old bulb.
7. Check for proper headlight aim.
WARNING
WARNING
WARNING
WARNING
WARNING
The halogen bulb contains gas under pres-
The halogen bulb contains gas under pres-
The halogen bulb contains gas under pres-
The halogen bulb contains gas under pres-
The halogen bulb contains gas under pres-
sure and if impacted could shatter, and re-
sure and if impacted could shatter, and re-
sure and if impacted could shatter, and re-
sure and if impacted could shatter, and re-
sure and if impacted could shatter, and re-
sulting in flying fragments. Always wear eye
sulting in flying fragments. Always wear eye
sulting in flying fragments. Always wear eye
sulting in flying fragments. Always wear eye
sulting in flying fragments. Always wear eye
protection when servicing the bulb. Protect
protection when servicing the bulb. Protect
protection when servicing the bulb. Protect
protection when servicing the bulb. Protect
protection when servicing the bulb. Protect
the bulb against abrasions or scratches and
the bulb against abrasions or scratches and
the bulb against abrasions or scratches and
the bulb against abrasions or scratches and
the bulb against abrasions or scratches and
against liquids when lighted. Turn on the
against liquids when lighted. Turn on the
against liquids when lighted. Turn on the
against liquids when lighted. Turn on the
against liquids when lighted. Turn on the
bulb only when installing in a headlight.
bulb only when installing in a headlight.
bulb only when installing in a headlight.
bulb only when installing in a headlight.
bulb only when installing in a headlight.
Replace the headlight if damaged or cracked.
Replace the headlight if damaged or cracked.
Replace the headlight if damaged or cracked.
Replace the headlight if damaged or cracked.
Replace the headlight if damaged or cracked.
Keep the bulb out of the reach of children
Keep the bulb out of the reach of children
Keep the bulb out of the reach of children
Keep the bulb out of the reach of children
Keep the bulb out of the reach of children
and dispose of the used bulb with care.
and dispose of the used bulb with care.
and dispose of the used bulb with care.
and dispose of the used bulb with care.
and dispose of the used bulb with care.