11
1. Device for installing the shoulder strap
2. Engine
3. Bottle for the oil mixture
4. Protection of the blade (pruner)
5. Assembly tools (wrenches and screwdrivers)
6. Pruner
7. Strap
8. Handle
9. Power Switch
10. Fuel tank
11. Exhaust of gas
12. Choke control
13. Starter
14. Tank cap
Pole mounted pruner
1- Tube
2- Oil tank for lubrication
3- Cutting head
4. ASSEMBLY
NOTE: This model comes with a stretch tube. This tube must be installed on the fixing tube of
the machine then the accessories will be installed on this extensible tube.
A) Main unit
Install the front handle as shown in the picture below. Be sure to orient the stem toward the hole. Do
not fasten the screws until you have set the most comfortable working position with the straps. The
front handle must be oriented as shown in the picture for "the motor and drive unit".
