3
1. INTENDED USE
We do everything in our power to ensure continuous improvement of our products.
This is why the technical data and the data can be modified.
Pole pruner
Intended use / improper use
The pole pruner is exclusively intended for pruning trees and/or cutting small wood from
the ground. Any other use is considered improper and will damage the tool.
The correct use also includes reading and observing the instructions for use at each use
as well as observing the warnings fixed on the machine. Before and during use, it is
imperative to check the blade to ensure that there is no mechanical damage. In case of
necessary repairs, please contact your specialist dealer.
Only the use of spare parts approved by the manufacturer or original spare parts is
permitted. If unauthorized or non-original spare parts are used, the user is liable for
consequential injury to persons or property resulting in the manufacturer being deprived
of all liability.
Residual risks
A certain residual risk that cannot be totally excluded still exists even if the tool is used in
conformity. The type and design of the tool may represent the following potential hazards
depending on the use made of it:
-
Contact with sawdust
-
Inhalation of sawdust particles
-
Inhalation of exhaust gases
-
Skin contact with oil / gasoline
-
Inhalation of gasoline / oil vapors
-
Contact with projected chain links
-
Cutting of the fingers at the cutting chain
-
Burning of fingers in contact with hot surfaces (exhaust etc.).
2. SAFETY INSTRUCTIONS
General safety instructions
If you feel an unpleasant sensation in the hands or if you see a coloring of the skin of your
hands while using the machine, stop the work immediately. Have enough breaks when
working. Failure to observe sufficient work breaks may result in hand and arm vibration
syndrome.
It is thus necessary to assess this impact according to the work carried out or the use of the
machine and to take breaks accordingly. This greatly reduces the impact on the user during
the entire working period. Minimize your risk of vibration. Maintain this machine in accordance
with the instructions in the operating instructions.
If the machine is used frequently or more regularly, we recommend that you contact your
specialist dealer for anti-vibration accessories (handles) if necessary.
Avoid using the machine at temperatures of t = 10 ° C or lower. Develop a load plan to limit
the impact of vibration on the user.
Read this manual carefully before operating the machine for the first time. In case of doubt
about the connections or its use, please contact the manufacturer (specialist dealer).
In order to guarantee a high level of safety, the following instructions must be strictly adhered
to. Warning!
