background image

769-26434 / 00

01/22

Operator’s Manual

2-Cycle Chain Saw 

TB4620C

TABLE OF CONTENTS 

Service  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 

Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 

Know Your Unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 

Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 

Oil and Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 

Starting and Stopping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 

Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 

Cleaning and Storage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

SAVE THESE INSTRUCTIONS

IMPORTANT: Read this manual thoroughly before using this product. Follow all instructions.

All information, illustrations, and specifications in this manual are based 

on the latest product information available at the time of printing. We 

reserve the right to make changes at any time without notice. 

The product may vary slightly from the illustrations contained in this 

manual. 

Copyright© 2022 MTD SOUTHWEST INC, All Rights Reserved.

SERVICE

DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF 

PURCHASE WILL BE REQUIRED FOR WARRANTY 

SERVICE. 

For assistance regarding the assembly, operation or maintenance of 

the unit, please call 1-800-828-5500 (in the United States) or 1-800-

668-1238 (in Canada). Additional information can be found at 

www.troybilt.com (in the United States) or www.troybilt.ca (in 

Canada). 

Warranty service is available through an authorized service center. 

To locate a service center in your area, please visit our website or 

call the number listed above. Service on this unit, both within and 

after the warranty period, should only be performed by an authorized 

and approved service center. When servicing, use only identical 

replacement parts.

Register your product at www.troybilt.com (US) or www.troybilt.ca

(Canada) to have parts, owner manuals, and warranty information at 

your fingertips.

Summary of Contents for TB4620C

























































Reviews: