42
8.3.3.3 Noise Suppression
The Noise Suppression feature allows the radio to automatically eliminate ambient noise when receiving or
transmitting voice. This feature enhances the voice clarity, while also decreases the volume.
With this feature enabled by your dealer, go to
Menu
>
Profiles
>
Settings
>
Audio Set
>
Noise Suppression
, and
then press the
OK/Menu
key to enable the feature.
8.4 Scan
8.4.1 Conventional Mode
In conventional mode, the Scan feature allows you to listen to activities on other channels, keeping track of your
team members.
8.4.1.1 Enabling the Scan Feature
Go to
Menu
>
Scan
>
Scan On/Off
, and then press the
OK/Menu
key.
Press the preprogrammed
Scan
key.
With this feature enabled, the radio scans according to the scan list preset for the current channel. During the
scanning, the LCD displays , and the LED indicator flashes orange slowly.
When detecting activities on a channel, the radio stays on the channel and the LED indicator glows green. If the
radio stays on Priority Channel 1 or Priority Channel 2, the LCD displays or . If the radio stays on a non-
priority channel, the LCD displays .
If you do not want to hear activities on the channel, press the preprogrammed
Nuisance Temporary Delete
key to remove the channel from the scan list temporarily.
8.4.1.2 Setting the Scan List
The scan list is a list of up to 32 analog and digital channels that the radio scans.
Go to
Menu
>
Scan
, select the scan list, and then do one of the following:
Select
Add CH
, and then press the
OK/Menu
key to add a new channel to the list.
Select
Set Default
, and then press the
OK/Menu
key to set the list as the default scan list for the current
channel.
Select
View Record
, and then press the
OK/Menu
key to view or manage all channels on the current list.
