36
If the password is entered incorrectly for the preset consecutive times, the radio cannot be used normally.
Contact your dealer to reset the password.
8.1.3.2 Encrypt
The Encrypt feature provides end-to-end encryption for voice and data to protect them against eavesdropping.
Enabling or Disabling the Encrypt Feature
If the radio is configured with this feature, you can enable or disable it in either of the following ways:
Go to
Security
>
Encrypt
>
On/Off
, and then press the
OK/Menu
key.
Press the preprogrammed
Encrypt
key.
In conventional mode, the Encrypt feature is enabled for the current channel. When switching to the channel,
the radio automatically enables encryption.
Setting the Encrypt Feature
In conventional mode, you can add or select the encrypt key.
Adding an Encrypt Key
Go to
Security
>
Encrypt
>
New Key
, specify the key-related parameters, and then press the
OK/Menu
key.
The following table describes the key-related parameters.
Parameter
Description
Key ID
The ID for each key must be unique. The value ranges from 1 to 255.
Key Alias
The key alias is composed of letters, digits, and special characters.
Key Length
The key length can be 10 characters, 32 characters, or 64 characters.
Key Value
The key value is composed of digits and letters and within the key length.
Selecting the Encrypt Key
Go to
Security
>
Encrypt
>
Key List
, select the encrypt key, and then press the
OK/Menu
key.
In trunking mode, you can select the encryption type.
Go to
Security
>
Encrypt
>
Encrypt Service
, set the encryption type to
Only Voice
,
Only Data
, or
Voice
