34
8.1.2.5 Squelch Level (Conventional Only)
The squelch level refers to the squelch threshold required for the speaker of the radio to be turned on. The higher
squelch level requires a stronger signal.
Go to
Call Settings
>
Squelch
, select
Weak
,
Normal
, or
Tight
, and then press the
OK/Menu
key.
Press the preprogrammed
Adjust Squelch Level
key to adjust the level.
8.1.2.6 Compandor (Conventional Only)
The Compandor feature allows the radio to compress the voice signal when transmitting and decompress the voice
signal when receiving to improve the voice quality.
Go to
Call Settings
>
Compandor
, and then press the
OK/Menu
key to enable or disable the feature.
8.1.2.7 ESN Check in Idle (Trunking Only)
The ESN Check in Idle feature allows the radio to respond to the ESN check from the trunking system when the
radio is registering or after the radio has registered.
Go to
Call Settings
>
ESN Check In Idle
, and then press the
OK/Menu
key to do either of the following:
Enable the feature.
The radio responds to the ESN check both during registration and after registration.
Disable the feature.
The radio responds to the ESN check only during registration.
8.1.2.8 Call Priority (Trunking Only)
The Call Priority feature allows you to set the priority of all voice services except emergency calls. The priority
levels include
Low
,
Medium
,
High
, and
Preemption
(with the Preemptive Call feature enabled by your dealer).
When all channels are occupied, the call requests are put in a queue according to their priorities. When a channel
is released, the call with a higher priority will be connected prior to the call with a lower priority.
During group call queuing, only the calling party receives the queuing prompt. During private call queuing, both
the calling party and the called party receive queuing prompt. When the queue is full, the higher-priority calls can
jump the queue, and the lower-priority calls will be extruded out (the system will prompt that it is busy)
accordingly.
Go to
Call Settings > Priority
, select the priority level, and then press the
OK/Menu
key.
