MAINTENANCE
87
FIGURE 14. CHECK THE LIFT CHAINS
6705
1
2
3
4
5
6
7
1. WORN PIN
2. CRACKS
3. EDGE WEAR
4. HOLE WEAR
5. LOOSE LEAVES
6. DAMAGED PIN
7. CORROSION
6. If the lift truck is equipped with a side--shift carriage or
attachment, inspect the parts for cracks and wear. Make
sure the parts that fasten the side--shift carriage or attach-
ment to the carriage are in good condition.
7. Check that the lift chains are correctly lubricated. Use
SAE 30 engine oil to lubricate the lift chains.
8. Inspect the lift chains for cracks or broken links and
pins. See FIGURE 14.
9. Inspect the chain anchors and pins for cracks and dam-
age.
10. Make sure the lift chains are adjusted so that they
have equal tension.
Adjustments or replacement of the
lift chains must be done by authorized personnel.
Safety Labels
WARNING
Safety labels are installed on the lift truck to give in-
formation about operation and possible hazards. It is
important that all safety labels are installed on the lift
truck and can be read.
Check that all safety labels are installed in the correct
location on the lift truck. See the
PARTS MANUAL
or the
FRAME
section of the
SERVICE MANUAL
for the correct
location of the safety labels.
Operator Restraint System (See FIGURE 15.)
The seat belt, hip restraint brackets, seat and mount,
hood and latches are all part of the operator restraint sys-
Property of American Airlines
Summary of Contents for S40XM
Page 8: ...CONTENTS 6 NOTES P r o p e r t y o f A m e r i c a n A i r l i n e s ...
Page 10: ...WARNING 8 NOTES P r o p e r t y o f A m e r i c a n A i r l i n e s ...
Page 62: ...OPERATING PROCEDURES 60 NOTES P r o p e r t y o f A m e r i c a n A i r l i n e s ...
Page 132: ...MAINTENANCE 130 NOTES P r o p e r t y o f A m e r i c a n A i r l i n e s ...
