Hyster S40XM Operating Manual Download Page 4

Page: 4 / 134

FOREWORD

Some of the components and systems described in this

OPERATING MANUAL

will NOT be installed on your unit.

If you have a question about any item described, contact

your dealer for Hyster lift trucks.

Additional information

that describes the safe operation

and use of lift trucks is available from the following
sources:

•

Employment safety and health standards or
regulations (Examples: “Occupational Safety and
Health Standards (USA)”, “Canada Material Handling

Regulations”.

•

Safety codes and standards (Example: American
National Standard, ANSI B56.1,

Safety Standard For

Low Lift And High Lift Trucks

•

Publications from government safety agencies,
government insurers, private insurers and private
organizations (Example:

Accident Prevention Manual

For Industrial Operations,

from the National Safety

Council).

•

Guide for Users of Industrial Lift Trucks

(Hyster Part

No. 852930) describes lift truck safety, good

maintenance practices, and training programs and is
available from your dealer for Hyster lift trucks.

NOTE:

Hyster lift trucks are not intended for use on public

roads.

NOTE:

The following symbols and words indicate safety in-

formation in this manual:

WARNING

Indicates a condition that can cause death or injury!

CAUTION

Indicates a condition that can cause injury or property

damage!

Property of American Airlines

Summary of Contents for S40XM







































































































































Search results

Summary of Contents for S40XM

Reviews:

Related manuals for S40XM

Brands by name

Popular brands

Hyster S40XM, Operating Manual

Search results

Summary of Contents for S40XM

Reviews:

Related manuals for S40XM

Brands by name

Popular brands