Hyster S40XM Operating Manual Download Page 54 | Manualshive

Page: 54 / 134

background image

OPERATING PROCEDURES

52

Move forward slowly. When the load is in position, lower
the load on to the stack or the rack. Lower the forks just

enough to remove them from under the load. Do not lower
the forks so that they will drag on the surface under the
load. Tilt the mast forward just enough to permit smooth

removal of the forks from under the load. Carefully move
the lift truck backward to remove the forks from under the

load. Lower the forks when travelling.

NOTE:

Not every load can be lifted using only the forks of

a lift truck. Some loads will require a special attachment.

6. When lifting round objects, use a block behind the ob-

ject. Tilt the mast forward so that the forks can slide along
the floor under the object to be lifted. Tilt the mast fully
backward to help keep the load on the forks.

Load Handling, Travelling

1. When travelling with the load lowered, keep the load
against the carriage and the mast tilted fully backward.
This action will help keep the load on the forks and pro-

vide good forward and side stability.

Property of American Airlines

«
...
52
53
54
55
56
...
»

Summary of Contents for S40XM







































































































































Reviews:

No comments

Related manuals for S40XM

Brand: Big Joe Pages: 28

Brand: Gradall Pages: 327

Telelift 3713 SX

Brand: Terex Pages: 212

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands