Hyster S40XM Operating Manual Download Page 32

Page: 32 / 134

MODEL DESCRIPTION

ITEM

NO.

ITEM

FUNCTION

MONOTROL

Pedal

The MONOTROL pedal controls the speed and direction of the lift truck.

Pushing on the right side of the pedal causes the lift truck to move in

REVERSE

. Pushing on the left side of the pedal causes the lift truck to move in

FORWARD

. The speed of the engine increases as the pedal is depressed. The

reverse lights and the optional reverse alarm will be on in the

REVERSE

position during normal operation.

Turn Signal Lever

When installed, this lever is on the right side of the steering column. Move the

lever toward the front of the lift truck to operate the left--hand turn signals.

Move the lever toward the rear of the lift truck to operate the right--hand turn

signals.

Battery Disconnect

Switch (Not Shown

In FIGURE 6.)

This switch is to the rear of the hydraulic control levers on the hood. The switch

is only on units with the “GS”, “LPS” or “DS” fire safety rating. The operator can

shut off all electrical power to the lift truck by moving the handle to the left

“open circuit” position.

Property of American Airlines

Summary of Contents for S40XM







































































































































Search results

Summary of Contents for S40XM

Reviews:

Related manuals for S40XM

Brands by name

Popular brands

Hyster S40XM, Operating Manual

Search results

Summary of Contents for S40XM

Reviews:

Related manuals for S40XM

Brands by name

Popular brands