Hyster S40XM Operating Manual Download Page 110

Page: 110 / 134

MAINTENANCE

108

4. Connect the supply hose to the quick disconnect

fitting on the LPG tank. If the LPG tank has an aux-

iliary fill fitting, connect the supply hose to this fit-

ting. Make sure the correct adapter is used to con-

nect the supply hose to the auxiliary fill fitting.

5. Open the vent valve on the liquid level indicator.

6. Open the fuel valve on the LPG tank.

7. Open the valve on the end of the supply hose.

8. Watch for a discharge from the vent valve on the

liquid level indicator. When a cloud of visible vapor

appears, the LPG tank is full. Do not fill the LPG

tank to more than the maximum level indicated by

the liquid level indicator. Immediately close the

valve at the end of the supply hose.

9. Close the vent valve on the LPG tank.

10. Close the fuel valve on the LPG tank.

11. Disconnect the hose supply.

12. Stop the pump.

13. Close the liquid outlet and the by--pass return

valve on the storage tank.

Gasoline or Diesel Fuel

WARNING

When fuel is added, keep the funnel or fuel nozzle in

contact with the metal of the fuel tank to reduce the

possibility of static electric sparks. Clean any spilled

fuel.

1. Remove the fuel cap. Make sure the fuel tank is filled
with the correct fuel for the type of engine in the lift truck.

Clean the fuel cap.

2. Replace the fuel cap.

WHEELS AND TIRES

General

The models of lift trucks beginning with an “S” are

equipped with solid rubber tires. The models of lift trucks
beginning with an “H” are equipped with pneumatic tires

or solid rubber tires that look like pneumatic tires. These
variations in the tires also cause a variation in the types of

wheels and the disassembly and assembly procedures.

Property of American Airlines

Summary of Contents for S40XM







































































































































Search results

Summary of Contents for S40XM

Reviews:

Related manuals for S40XM

Brands by name

Popular brands

Hyster S40XM, Operating Manual

Search results

Summary of Contents for S40XM

Reviews:

Related manuals for S40XM

Brands by name

Popular brands