8000 SRM 707
Maintenance Schedule
Table 1. Maintenance Schedule (Continued)
Item
No.
Item
8 hr/
1 day
250
hr/
6 wk
500 hr/
3 mo
1000
hr/
6 mo
2000 hr/
1 yr
Procedure or
Quantity
Specification
15
Mast
Sideshift Carriage
L
3 Fittings
Multipurpose
Grease
See NOTE 8
15
Mast
Integral Sideshift
Carriage
X
C
Check wear
4 Bearings
2.5 mm (0.098 in.)
or less
20
Hydraulic Oil Filter
C
1
See NOTE 2
See Parts Manual
8
Fuel Filter,
Gasoline and LPG
(Pre-2004)
C
1
See Parts Manual
Fuel Filter,
LPG (IMPCO)
C
LPG Regulator
(Aisan)
X
Drain tar
LPG Regulator
(IMPCO)
X
Drain Tar
Idle Circuit/Injector
Filter (Aisan)
C
X=Check C=Change L=Lubricate CIL=Check Indicator Light during operation
NOTE 1:
Check the fuel system for leaks prior to any service or maintenance activity.
NOTE 2:
Change filters on NEW lift trucks at first 100 hours on hourmeter.
NOTE 3:
Very dirty conditions require daily clean and check.
NOTE 4:
Heavy-duty or high-temperature operations require more frequent checks.
NOTE 5:
Cooling indicator light is used only on S40-65XM lift truck models.
NOTE 6:
In dirty or dusty environments, replace at 1000 hours.
NOTE 7:
Perkins engine is to be at operating temperature of 82 ±1.5 C (180 ±35
F)
when inspecting for low
idle setting.
NOTE 8:
Multipurpose grease with 2 to 4% molybdenum disulfide.
NOTE 9:
Mazda M4-2.0G and M4-2.2G 2004 or newer engines, check at 5000 hours or 7 years.
NOTE 10:
Replace on Mazda M4-2.0G and M4-2.2G engines every 2500 hours. Use only hour interval.
NOTE 11:
On Mazda M4-2.0G and M4-2.2G engines, replace the timing belt every 3500 hours. Use only the
hour interval.
NOTE 12:
Perform maintenance as specified by the manufacturer.
17
